SGI O350 MIPS R16 8X800MHZ 4X4 system. ***plus IRIX CD images

Description

This listing is for a used Origin 350 rack mount system it has eight R16K 800Mhz processors, 4096MB memory, 73GB system disk, with IRIX6.5.30 installed. This is a 4X4 system, each chassis has 4 CPUs and memory, it has been tested and works.
But wait their is more, act now and I will include an additional hard drive and not one but two additional power supplies! (well I gave it a try, LOL)
As an additional bonus I will also include on the system drive images of IRIX 6.5.30 installation CDs, you can then burn them to CDs or copy to other media for future use. original CDs not included.
system will be packaged and shipped by Fedex Ground unless other arrangements are suggested and agreed to.
Please see pictures for overall condition and contents of auction, below is the  console output of HINV & Uname command:
IRIX Release 6.5 IP35 IRIS
Copyright 1987-2006 Silicon Graphics, Inc. All Rights Reserved.
Last login: Sun Feb  2 09:16:00 PST 2020 on ttyd1
TERM = (vt100)
IRIS 1# date
Sun Feb  2 09:19:21 PST 2020
IRIS 2# uname -R
6.5 6.5.30m
IRIS 3# hinv -vm
Location: /hw/module/001c01/node
IP53_4CPU Board: barcode NRE758     part 030-1959-003 rev -C
Location: /hw/module/001c01/IXbrick/xtalk/15
2U_INT_53 Board: barcode NRT812     part 030-1809-006 rev -B
Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/0/1/ioc4
IO9 Board: barcode NSW978     part 030-1771-005 rev -B
Location: /hw/module/001c02/node
IP53_4CPU Board: barcode NRE747     part 030-1959-003 rev -C
Location: /hw/module/001c02/IXbrick/xtalk/15
2U_INT_53 Board: barcode NRT830     part 030-1809-006 rev -B
8 800 MHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
CPU 0 at Module 001c01/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
CPU 1 at Module 001c01/Slot 0/Slice B: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
CPU 2 at Module 001c01/Slot 0/Slice C: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
CPU 3 at Module 001c01/Slot 0/Slice D: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
CPU 4 at Module 001c02/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
CPU 5 at Module 001c02/Slot 0/Slice B: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
CPU 6 at Module 001c02/Slot 0/Slice C: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
CPU 7 at Module 001c02/Slot 0/Slice D: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 001c01/Slot 0: 2048 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Memory at Module 001c02/Slot 0: 2048 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
IOC4 firmware revision 62
IOC3/IOC4 external interrupts: 1
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
HUB in Module 001c02/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
IP35prom in Module 001c02/Slot n0: Revision 6.210