SuperMicro X9DRFF-7 w/2x Xeon E5-2660 CPUs LGA 2011 Motherboard for F617R2-F73

Description

Up for selling USED SuperMicro X9DRFF-7 w/2x Xeon E5-2660 CPUs LGA 2011 Motherboard for F617R2-F73.
Key Features
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and
E5-2600 v2
family
†
2. Intel® C602J chipset; QPI up to 8.0GT/s
3. Up to 512GB ECC DDR3, up to
1866MHz; 8x DIMM slots
4. Expansion slots: 2 PCI-E 3.0 x16
5. Intel® 82574L Dual port GbE LAN
6. 4x SATA2 and 2x SATA3 ports
7. 8x SAS2 (6Gb/s) ports via Broadcom 2308
8. Integrated IPMI 2.0 and KVM with
Dedicated LAN
9. 2x USB 2.0 ports (rear)
Product SKUs
.
MBD-X9DRFF-7 -B
X9DRFF-7 (Bulk Pack)
Physical Stats
Form Factor
Proprietary
Dimensions
8.54" x 19.92" (21.7cm x 50.6cm)
Processor/Cache
CPU
Intel® Xeon® processor E5-2600
and
E5-2600 v2
family
†
(up to 130W TDP **)
Dual Socket R (LGA 2011)
Cache
Up to 30MB
System Bus
QPI up to 8 GT/s
Note
† BIOS version 3.0 or above is required
Note
** Motherboard supports this maximum TDP. Please verify your system can thermally support
System Memory
Memory Capacity
8x 240-pin DDR3 DIMM slots
Up to 512GB DDR3 ECC LRDIMM
Up to 256GB DDR3 ECC RDIMM
Up to 64GB DDR3 ECC/non-ECC UDIMM
Memory Type
1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM
Memory Voltage
1.5 V, 1.35 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
Intel® C602J chipset
AHCI SATA
SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
SATA 3.0 6Gb/s with RAID 0, 1
SAS
SAS2 (6Gb/s) via Broadcom 2308
SW RAID 0, 1, 10 support
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers
Intel® 82574L Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video
Matrox G200eW (Nuvoton WPCM450 BMC)
Input / Output
AHCI SATA
2x SATA 3.0 ports (6Gb/s)
4x SATA 2.0 ports (3Gb/s)
SAS
8x SAS2 ports (6Gb/s)
LAN
2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB 2.0 ports (rear)
Video
1x VGA port
Serial Port / Header
1x Fast UART 16550 port
DOM
1 DOM (Disk on Module) power connector
TPM
1 TPM Header
Chassis (Optimized for X9DRFF-7 )
Tower / 4U Rackmount
CSE-F418IL-R1K62BP
CSE-F418IL-R1K62BP
CSE-F424AF-R1K28BP
CSE-F424BD-R1K28BP
Important Chassis Notes
This motherboard is designed only for FatTwinâ„¢ chassis
Expansion Slots
PCI-Express
2 PCI-E 3.0 x16 slots
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
Management
Software
Watch Dog
NMI
IPMI 1.5 / 2.0
Power Configurations
ACPI / APM Power Management
Power-on mode for AC power recovery
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
5+1 Phase-switching voltage regulator
FAN
4x 4-pin fan headers
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
PECI
LED
Suspend Static indicator LED
UID/Remote UID
Other Features
RoHS
Operating Environment
Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)